It can be used for concrete pool and liner pool.
Stainless Steel Front PAR56 Niche IP68 Waterproof for Concrete and Liner Pool
| Suitable Pool | Liner pool, concrete pool |
| Function | To install par56 bulb, including led par56 and halogen par56 |
| Material | Stainless steel front+plastic embedded part |
| Installation way | Recessed into pool wall |
| Power cable | With 1.5 meter |
| Dimension | D280xD230xH160mm |
| IP rating | IP 68 waterproof |
| Certification | CE, RoHS, FCC |
| Warranty | Two years |
Installation
1. Buyer needs to open a hole on pool wall with suitable size to put this niche.
2. Put power cable go through of back side nut of niche, and make the nut connecting waterproof to avoid water leaks outside of it.
3. Put niche into pool wall hole, and make sure the connecting place waterproof bewteen niche and wall.
4. Fix LED PAR56 bulb at inner bucket of niche, and make sure connecting place of cable waterproof to avoid water gets inside to touch the connector(feet) of par56 bulb.
5. Put the inner bucket of niche and par56 bulb into outer bucket of niche, and fix it tight.
6. Connect power to test lamp if works correctly, because sometime the connecting might be loose, but make sure, do not let the lamp on more than 4 minutes when there is no water cover it, if not, the bulb might get hot easier and burnt out.
LED PAR56 Bulb Effect
Resin filled led pool light effect
The resin filled pool lamp is fixed at front cover of niche, no need inner bucket and O-ring, which is different from installation of LED PAR56 Bulb, because the lamp is waterproof already, no need O-ring to make it waterproof, but can be put into water directly.
MR16 Spot Light Housing in 304 Stainless Steel IP 68 Waterproof
Solar Powered LED Street Light 12W with Motion Sensor 3.2V 3000mAH Li-ion Battery
304 Stainless Steel Niche for Resin Filled LED PAR56 Pool Light 12V IP68
Resin Filled LED Pool Light 18W RGB Multicolor AC12V IP 68 Waterproof Switch on/off
