One Drag Two Solar Landscape Ground Plug-in lamp IP65 Waterproof
There is a switch on power cable, buyer can adjust its output brightness in 100% full, 75%, and 50%.
There is a switch on power cable, buyer can adjust its output brightness in 100% full, 75%, and 50%.
One Drag Two Solar Landscape Ground Plug-in lamp IP65 Waterproof
Solar board | 6V / 3W |
Solar board size | 179x154x27mm |
Battery | 3.7V, 3600mAh 18650 lithium battery |
LED Light Source | 3W |
LED color option | Warm white / Pure white / RGB |
Control way | Light sensor / IR sensor |
Lens angle | 30 degree |
Charging time | 6-8 hours |
Working time | 10-12 hours ( in 100% full brightness), 18 hours ( in 75% brightness), 30 hours ( in 50% brightness) |
Lamp size | 69x58x104mm |
Material | ABS |
Instructions
1. Take out the product, take out the ground plug, screw rubber plug and other accessories, select the appropriate position, insert the product on the ground or fix it on the wall, and connect the connecting wire between the solar panel and the lamp.
2. Adjust the irradiation position of the spotlight and select the installation direction of the solar panel. Be careful not to let the shade weeds block the solar panel and affect the direct sunlight charging effect.
3. Turn on the power button switch, set the required brightness of monochrome white light through the button (100% - 75% - 50% three-level lighting mode), and set six color modes of seven color red green blue yellow white through the button for RGB seven color. The solar light is used for charging during the day, and the lighting is automatically lit at night. The product has its own memory function.
4. This product is IP65 waterproof, but please do not install and place it in low-lying puddles and underwater.
5. If it has not been used for a long time, please charge the product under sunlight before use.
6. The ground plug and screw are sharp. Please be careful not to let children play and use to avoid injury.